juju Baby Boo, User Manual

Page: 8 / 62

8
2. Securing the baby with the harness
Firstly, adjust the shoulder straps height (see point ADJUSTING THE
SHOULDER HEIGHT), proceed as follows:
Step1. Loosen the harness (see point above), open the buckle, and place them
down side ways. Seat your child in the child car seat. Place both shoulder
straps over your child's shoulders.
Step2. Put the two metal sections of the buckle connectors’ together (fig. 1);
Slot the two buckle connectors into the slot in the top of the buckle until they
"click" into place (fig. 2)
Check the harness is correctly locked by pulling the shoulder straps upwards
(fig. 3).
3.Tighten the shoulder harness
Pull the shoulder straps upwards to remove the
whole harness then pull the adjuster strap until
the harness is fully tightened (fig. left).
The harness should be adjusted as tightly as
possible with out causing discomfort to your
child.