background image

STEP ONE: Place Juice Bowl

Place Juice Bowl on top of the Motor Base so
that the Juice Spout is to the front (over the
intended part of the Juicer Base). Align the
four grooves on the underside of Juice Bowl
with the four posts on top of the Motor Base.
Lower the Juice Bowl onto the Motor Base so
that the grooves fit onto the posts, rotating
slightly if necessary.

STEP TWO: Place Filter Basket

With both hands, grasp the rim of the Filter
Basket and center it over the Motor Base Hub.
Carefully lower the Filter Basket onto the Hub,
rotating slightly until it drops into the proper
position; then press firmly down on the rim of
the Filter Basket to secure. (Be sure to apply
pressure the both sides of the Filter Basket
evenly to ensure proper seating.) When seated
properly, the Filter Basket will spin freely and
will not lift out of the Juice Bowl.

CAUTION: Use care when handling the Filter
Basket; the Cutting Blades are very sharp!

STEP THREE: Place Clear Lid

Place the Clear Lid onto the Juice Bowl so that
the Pulp Ejection Opening on the Clear Lid is
over the Pulp Spout on the Juice Bowl.

10

ASSEMBLY INSTRUCTIONS

ALWAYS MAKE SURE THE JUICER IS UNPLUGGED

BEFORE STARTING TO ASSEMBLE.

OPERATING INSTRUCTIONS

• Make sure that the Juicer is completely and properly assembled. (See

ASSEMBLY INSTRUCTIONS.)

• Make sure the Filter Basket is securely seated and the Pulp Basket is at

the rear of the Juicer, ready to catch pulp.

• Place a glass underneath the Juice Spout.

• Plug the Juicer into a 120V AC electrical outlet. 

• Remove the Food Pusher from the Feed Tube.

• Place produce into the Feed Tube. 

• To re-insert the Food Pusher into the Feed Tube, it is necessary turn the

Food Pusher until the groove in the Food Pusher aligns with the rib on
the Feed Tube. The Food Pusher’s ribbed bottom edge directs food
through the Feed Tube and Filter Basket.

TO TURN THE JUICER ON:

Press either the “Hi” or “Lo” Speed Button and begin juicing.

NOTE: 

You do not have to turn the machine off to change speeds.

Simply press the appropriate Speed Button for each type of produce
being juiced. (Refer to Page 6 for suggested speed settings).

The Juicer will not operate if the Pulp Basket is not properly aligned
against the base of the Juicer.

TO TURN THE JUICER OFF:

Press the 

(OFF) Button. Be sure to unplug the Juicer from the outlet

when not in use.

9

~ Helpful Tip ~

To reduce cleaning time, line the Pulp Basket with a plastic produce

bag (the kind you put your produce in at the grocery store).

~ Helpful Tip ~

Try alternating the types of produce being juiced to ensure

maximum efficiency.

Juiceman_JM502_IB_14-6-06  6/14/06  8:07 PM  Page 19

Summary of Contents for JM502





















Reviews: