Adjusting the bicycle for riding comfort
1. Adjusting the seat height
Pull the seat clamp lever outward to loosen the seat post. Adjust the seat the
desired height. The maximum height should not extend beyond minimum
extension mark marked on the seat post. Tighten the seat clamp and close the
lever to lock in the seat’s height.
2. Adjusting the seat tilt and distance
Using a 6 mm Hex wrench, loosen the bolt under the seat. Adjust the seat tilt and
seat distance forward or backward. Tighten the bolt securely to lock in your
desired position.
3. Adjusting the stem height
Use a 6mm Hex wrench to loosen the stem. Move the stem up or down to the
desired height. The maximum height should not extend beyond minimum
extension mark marked on the stem. Check to be sure the handlebars are
pointing in the same direction as the wheels. Re-tighten the bolt to lock in the
stem’s position.
4. Adjusting the handlebar tilt angle
Use a a 5 mm Hex wrench to loosen the two screws near the center of the
handlebars. Tilt the handlebars to the desired position. Re-tighten the screws
securely to lock in the handlebars. Be sure both screws are tightened equally.
12
