Juguetronica SoccerBots Arena, Instruction Manual

Page: 5 / 12

5
TRANSMITTER PARTS TRANSMITTER FUNCTIONS
INSERTING THE BATTERIES INTO THE CONTROLLER
CHARGING THE SOCCERBOT BATTERY
Use the screwdriver to open the lid. Insert 2
"AAA" batteries (not included) and replace the
battery cover using the screwdriver again.
Important: Turn the robot off before charging in.
To charge the battery, insert the included USB cable into the USB port of a computer, mobile
phone charger, portable battery, etc.
The charging time is 2-3 hours, and the usage time is 2 hours.
1. Place the batteries in the right direction.
2. Do not mix new batteries with old ones.
3. Do not mix different types of batteries.
To protect the environment, do not dispose of the device at the end of its service life along with
household waste.
It can be disposed of at the appropriate collection points available in your area. Dispose of the
device in accordance with the European Directive on Waste Electrical and Electronic Equipment
(WEEE).
- Used, fully discharged batteries must be disposed of in specially designated collection containers,
at special waste collection points, or through electronic equipment distributors.
Users are required by law to dispose of batteries properly.
- These symbols are found on batteries that contain toxic substances:
Pb: The battery contains lead.
Cd: The battery contains cadmium.
Hg: The battery contains mercury.
For further information, please contact the municipal waste disposal authority.
Slide forward
Turn right
Turn left
Slide backwards
Shoot
Turn right
Walk forward
Turn left
Walk backwards
Shoot
Programming
Volume
Celebration
Walking speed
Sliding speed