3
3)
4)
1) TURNING ON AND OFF
In order to turn on the robot, use the front button.
When ROBOTRON MINI starts to move, it will start to emit sounds and make movements
that can be stopped with the ‘stop’ button on the remote control. After a few seconds, if not
interacted with, it will go into standby mode.
2) STANDBY MODE
If the robot does not receive any orders, it will emit a series of six sounds every 20 seconds. After
emitting the last sound, it will go into standby mode. To get off the standby mode, press the top
button on ROBOTRON MINI’s chest.
3) WALKING FORWARD
Upon pushing the ‘avanzar’ (forwards) button, the robot will take a few steps forwards, emitting
a sound with each step.
4) WALKING BACKWARD
After pushing the ‘retroceder’ (backwards) button, the robot will start to take some steps
backwards. In addition, it will emit a sound
with each movement.
INSTALACIÓN DE LAS PILAS
REMOTE CONTROL FUNCTION
INTRODUCTION
slide forward
switch mode
rotate to
the left
On / off
Motion sensor
24 LED lights
rotate to
the right
slide back
raise
volume
talk
dance
lower
volume
switch mode
demo
push forward
turn right
turn left
back up
stop any
action
6088-JUG0317-ROBOTRON-MINI-manual-english-17.indd 3
22/08/2017 17:59:51
