3.4 Battery Installation
Insert the batteries into the battery holder following the polarity guide
that is on the inside of the battery holder (Figure 3.4a). When properly
loaded the battery holder will look like the example in Figure 3.4b.
!
CAUTION
Note that the negative side of each battery goes to the
spring contacts of the battery holder .
3.5 Inserting the Holder into The JUGS Gun
™
The battery holder is designed so that it can only make contact with the
power connections inside the gun if the holder is slid into the gun in the
correct way. If you look closely at the holder you will see that there is a
positive and negative terminal on it. These need to be inserted into the gun
with the terminals located at the top as shown in the picture below.
Figure 3.4a
Figure 3.4b
Figure 3.5
7
8
Radar Gun Instructions.10-2018.indd 8
9/27/18 11:20 AM
