Judo PROFI JPF DN65, Installation And Operating Instructions Manual

Page: 5 / 8

JUDO PROFI 5
Type
Type
Backwash Protective Filter
JUDO PROFI DN65 - DN100
Abbreviated Designation:
JPF DN65 - DN100
Design Types
Technical Data
The following applies for all the models of
the device:
– Pressure loss when clean (after back-
washing): 0.2 bar at the water flow rate
(nominal flow rate) given in the table.
– Maximum ambient temperature and wa-
ter temperature: 30°C (86°F).
– The water to be filtered must conform
to the European Drinking Water Re-
gulations!
– Threaded connection to DIN 2999.
– Flange connection according to DIN 2633
Nominal Pressure JPF DN65: PN 16
Nominal Pressure JPF DN80, 100: PN 10
Operating
Pressure: 1,5 – 10 bar
The nominal pressure denotes the pressure
class, according to which the filter must fulfil
the requirements to DIN 19628 and DIN EN
13443-1. The maximum operating pressure
is lower, in order to ensure the optimum
function of the filter.
Installed dimensions
A = Installation length
B = unit width
C = Height above pipe centre
D = Height below pipe centre
F = Connection dimension waste water
Model
Pipe connec-
tion
Order No.
JPF DN65 DN65 8107014
JPF DN80 DN80 8010033
JPF DN100 DN100 8010034
Water flow rate
Model
Water flow rate for a pres-
sure loss of 0.2 bar with
clean sieve insert
1)
JPF DN65 27 m³/h
JPF DN80 50 m³/h
JPF DN100 70 m³/h
1) Data concerning the water flow rate are
valid for drinking water. The maximum water
flow rate for more polluted water is lower, de-
pending on the mesh size If so, a larger di-
mension has to be chosen.
Fig. 4: Installed dimensions e.g.: JPF DN80
Model A B C D F
JPF DN65 240 185 332 159 ¾"
JPF DN80 320 232 402 166 ¾"
JPF DN100 320 232 412 176 ¾"
All dimensions in [mm] (see Fig. 4)