JUDO MAFI
15
Operation
5.6.1 Servicing / repair
Before carrying out any work on the magnet-
ite filter, which extends beyond pure opera-
tional control, the system must be depres-
surised! Allow the magnetite filter to cool
down first! Failure to observe this can lead to
an uncontrolled escape of water and there-
fore lead to scalding and water damage in
the building. Strictly comply with the instruc-
tions given in the “Installation” and “Mainte-
nance” chapters.
5.7
Stoppages
ATTENTION
(see chapter “Safety information and
dangers due to non-compliance”)
If a magnetite filter has to be removed from
the flange or unscrewed, the chapter “In-
tended use” must always be observed!
–
Protect the flange surfaces from dam-
age! Damaged flange surfaces cannot
close tight any longer. As a result, es-
caping water can damage the building
and installations.
–
Store the magnetite filter in frost-free
conditions! Frost can cause any water
contained in the magnetite filter's voids
to freeze and thus cause mechanical
damage to the magnetite filter so that it
leaks at operating pressure or can burst.
Leaking water can cause major damage
to the building. In addition, people near
the magnetite filter can be injured by
breaking off filter parts.
–
When restarting the magnetite filter, fol-
low the instructions for a new magnetite
filter.
