background image

JUDO HEIFI-TOP

3

About this instruction manual

Table of Contents
1. About this instruction manual.......... 3

1.1 Symbols used .............................. 4

1.2 Safety information and dangers 

due to non-compliance ................ 4

1.3 Units used.................................... 4

2. Intended use ...................................... 5

2.1 Water pressure ............................ 5

2.2 Notes on special dangers ............ 5

3. Product information .......................... 6

3.1 Intended purpose......................... 6

4. Installation ......................................... 6

4.1 General........................................ 6

4.2 Discharging the

backwashing water ...................... 9

4.3 Backwashing process.................. 9

5. Operation ......................................... 11

5.1 Commissioning .......................... 11

5.2 Functional description................ 11

5.3 Backwashing ............................. 12

5.4 Backwashing interval................. 12

5.5 Modifications / changes / spare 

parts........................................... 12

5.6 Stoppages ................................. 12

6. Faults ................................................ 13
7. Maintenance..................................... 14

7.1 Cleaning .................................... 14

8. Warranty and services .................... 14
9. Data sheet ........................................ 15

9.1 Type........................................... 15

9.2 Models ....................................... 15

9.3 Technical data ........................... 15

9.4 Installed dimensions ¾" - 1¼" ... 16

9.5 Installed dimensions 1½" - 2" .... 16

9.6 Extent of supply ......................... 17

9.7 Accessories JHF-T ¾"-2" .......... 17

10. Spare parts....................................... 18
11. Customer service ............................ 20

1.

About this instruction 
manual

ATTENTION

(see chapter “Safety information and
dangers due to non-compliance”)

The instruction manual must permanently
be available at the place where the filter is
installed.

This instruction manual is intended to make
it easier to familiarize yourself with the filter
and its possible intended uses.

The instruction manual contains important
information in order to safely, properly and
economically run the filter.

It contains fundamental information, which
must be observed during installation, opera-
tion and maintenance. Observance of this
information helps to avoid dangers, reduce
repair costs and increase the reliability and
service life of the filter.

The instruction manual must be read and
used by each person entrusted with carrying
out work on the filter, for example:

installation

operation

maintenance 

(servicing, inspection, repair)

Installation and maintenance may only be
carried out by personnel authorized by the
manufacturer, who are capable of fulfilling
the instructions given in the installation and
operating instructions and the country-
specific regulations.

Apart from the instruction manual and the
legally binding accident prevention provi-
sions applicable in the country and place of
use, the recognized technical regulations for
safe and proper work must also be
observed.

Therefore, this instruction manual must
always be read by the fitter and responsible

Summary of Contents for JHF-T





















Reviews: