background image

JUDO GUBi-E

3

About this Instruction Manual

Table of Contents
1. About this Instruction Manual.......... 3

1.1 Symbols used .............................. 4

1.2 Safety information and dangers 

due to non-compliance ................ 4

1.3 Units used.................................... 4

2. Intended Use ...................................... 5

2.1 Water Pressure............................ 5

2.2 Instructions Concerning Specific 

Dangers ....................................... 5

3. Product Information .......................... 6

3.1 Intended purpose......................... 6

3.2 Test marks .................................. 6

3.3 Materials used ............................. 6

4. Installation ......................................... 7

4.1 General ........................................ 7

4.2 Discharging the

backwashing water ...................... 9

5. Operation ......................................... 10

5.1 Commissioning .......................... 10

5.2 Pressure setting......................... 10

5.3 Functional description................ 11

5.4 Backwashing ............................. 11

5.5 Modifications / changes / spare 

parts........................................... 13

5.6 Stoppages ................................. 13

6. Faults ................................................ 14
7. Maintenance..................................... 15

7.1 Cleaning .................................... 15

8. Warranty and Services.................... 15
9. Data Sheet ........................................ 16

9.1 Type........................................... 16

9.2 Models ...................................... 16

9.3 Technical specifications............. 16

9.4 Installed dimensions ¾" - 1¼"  .. 17

9.5 Scope of supply ......................... 17

9.6 Accessories ............................... 17

10. Spare Parts JGB-E ¾" – 1¼" .......... 18
11. Customer Support ........................... 20

Enclosure: Consultation Voucher

1.

About this Instruction 
Manual

ATTENTION

(See chapter on “Safety information and
dangers due to non-compliance”)

The instruction manual must be permanent-
ly available at the place in which the Domes-
tic Water is used.

This instruction manual is intended to make
it easier to familiarize yourself with the
Domestic Water and its possible intended
uses.

The instruction manual contains important
information in order to safely, properly and
economically run the Domestic Water.

It contains fundamental information, which
must be observed during installation, opera-
tion and maintenance. Observance of this
information helps to avoid dangers, reduce
repair costs and increase the reliability and
service life of the Domestic Water.

The instruction manual must be read and
used by each person entrusted with carrying
out work on the Domestic Water, for exam-
ple:

installation

Operation

Maintenance

 (servicing, inspection, re-

pair)

Installation and maintenance may only be
carried out by personnel authorized by the
manufacturer, who are capable of fulfilling
the instructions given in the installation and
operating instructions and the country-spe-
cific regulations.

Apart from the instruction manual and the le-
gally binding accident prevention provisions
applicable in the country and place of use,
the recognized technical regulations for safe
and proper work must also be observed.

Summary of Contents for GUBi-E





















Reviews: