JUDO i-soft@home 5
11
Installation
The profile of the profile flange seal must
point towards the rotary flange fitting (see
fig. 5). If this is not observed, the sealing
may not be perfect resulting in water escap-
ing. This could result in water damage to the
home and furnishings and equipment.
– Fully tighten the four M6×25 hexagon
socket head screws.
The hand wheel of the bypass valve can ei-
ther project vertically upwards or to the side.
Installation should be performed so that, de-
pendent on the local circumstances, the
hand wheel can be easily accessed.
4.2.3 Installation of the support ele-
ments
The bracket set (2 brackets with one pipe
clamp each) is screwed to the wall with 4
hexagon head screws.
Notes on installing the wall support (contain-
er support) are included in the correspond-
ing installation instructions.
Fig. 4:
Bypass valve (JQX)
Fig. 5:
Profile flange seal
Rotary flange fitting
Handwheel
Device-side flange (“G”)
Pipe-side flange
(“R”)
Select the tightening torque (about 4
Nm) so that the seal works effective-
ly!
Fig. 6:
Support elements
Parallel
connection flange
Bracket
set
Rotary flange
fitting
Wall support
Bypass
valve
