background image

Page 7

 Meat Mincer

Cautions

• 

This appliance is not intended for use by persons (including children) with 

reduced physical, sensory or mental capabilities or lack of experience 

or knowledge, unless they have been given supervision or instruction 

concerning use of the appliance by a person responsible for their safety.

• 

Otherwise, always keep the unit out of the reach of children.

• 

Before use, check that your mains power supply corresponds to the 

voltage shown in this manual.

• 

This appliance is not intended to be operated by means of an external 

timer or a separate remote-control system.

• 

Do not run the mincer for more than 10 minutes at once. After 10 minutes, 

switch off and allow a further 10 minutes to cool.

• 

Do not connect the Plug 

15

 into your socket with wet hands.

• 

Unplug the unit whenever it is not in use.

• 

Never leave the unit unattended when it is operating.

• 

The Mains Lead 

15

 should be positioned so as not to cause an obstruction 

or to overhang the edge of the surface, where it could accidentally 

snagged or pulled by children.

• 

Ensure that the Mains Lead 

15

 is not near any hot surface.

• 

Pull the Plug (do not pull Mains Lead) 

15

 to disconnect from mains socket.

• 

Do not put your fingers or any object other than the Food Pusher 

5

 into 

the Feed Head 

2

 when the appliance is running.

• 

THE CUTTING BLADE 

7

 IS SHARP; TAKE CARE WHEN HANDLING.

• 

Do not connect the Plug 

15

 to the mains electricity supply until you have 

assembled the appliance. 

• 

Do not immerse the Motor Body 

1

 in water.

• 

Do not switch on or attempt to operate the appliance if it appears to be 

faulty in any way - contact Judge customer services at the address given in 

the warranty section.

• 

Never attempt to make any repair to the appliance yourself - contact 

Judge customer services at the address given in the warranty section.

• 

Please keep your purchase receipt.

Summary of Contents for JEA58









Reviews: