User Manual
3
800.321.6221
GuestCall Paging, IQ Pagers
Model Number: J1705, J1706
System Configurations
System Default Configuration
The paging system was set to default settings listed below prior to shipment.
>
Current time is set.
>
Out of Range is set to OFF
>
Audible (voice alert) is set to OFF
To enter programming mode, on the transmitter, press SETUP, use password 1379 and press ENTER.
Use the */MENU button to scroll and the # / SELECT button to choose the menu option.
Once you have saved your changes, press CANCEL until you return to the main PAGER # screen.
Set Current Time
>
Scroll to SET CURRENT TIME.
>
Set Hours, Press ENTER.
>
Set Minutes, Press ENTER.
>
Press SELECT for AM/PM.
>
Press ENTER to save.
>
Press CANCEL to exit.
Turn Pager Off
This system has an “ALL SLEEP” function that turns off all battery pagers (for example, manager pagers) at once
automatically.
To turn this feature on:
>
Scroll to the TURN PAGER OFF menu screen.
>
Press the ENTER key to edit the time to turn the pager off.
>
Set the hour then press ENTER key.
>
Set the minutes and press ENTER key.
>
Use the #/Select key to select AM or PM.
>
After the correct time is set, press ENTER key.
Search Pagers
This feature causes ALL pagers (that are not on the charging rack) to signal at once. This feature is useful when you
are closed and would like to locate any misplaced pagers around your restaurant. To search for missing pagers, scroll
to the SEARCH PAGER? Menu and press the ENTER key. Transmitter will send signal to all pagers every 12 seconds.
Any pager not in the charging rack will signal (beep or voice).
