User Manual
3
800.321.6221
GuestCall Paging, CommPass Pagers
Model Number: J1701, J1702
Distributing a Pager
>
Remove a CommPass pager from the charger.
>
The pager will flash and vibrate to preview what the alert will look like for the guest.
>
Hand the pager to the guest, stating that the pager will go off with they have been paged.
Paging a Guest
>
To page a guest, enter the 1 to 3-digit pager number into the transmitter and press SEND.
>
The pager will alert until it is returned to the charger.
Setup is Complete
If you have any additional questions, please contact us at the addresses below.
System Configurations
System Default Configuration
The paging system was set to default settings listed below prior to shipment.
>
Current time is set.
>
Out of Range is set to OFF
>
Audible (voice alert) is set to OFF
To enter programming mode, on the transmitter, press SETUP, use password 1379 and press ENTER.
Use the */MENU button to scroll and the # / SELECT button to choose the menu option.
Once you have saved your changes, press CANCEL until you return to the main PAGER # screen.
Set Current Time
>
Scroll to SET CURRENT TIME.
>
Set Hours, Press ENTER.
>
Set Minutes, Press ENTER.
>
Press SELECT for AM/PM.
>
Press ENTER to save.
>
Press CANCEL to exit.
Turn Pager Off
This system has an “ALL SLEEP” function that turns off all battery pagers (for example, manager pagers) at once
automatically.
To turn this feature on:
>
Scroll to the TURN PAGER OFF menu screen.
