JTECH CommPass, Manual

Page: 6 / 12

6
Paging Using a Desktop Transmitter:
1. Remove the
Pager you wish to page from the
Charger .
2. The
Pager will flash and vibrate to confirm it is
ready for use.
3. The Pager LED in the front of the Pager will
continue to flash every 3-4 seconds to confirm the
Pager is ON and ready to accept a page.
4. Enter the number of the
Pager you wish to page on
the Transmitter or Remote Keypad .
5. Press # to send the page. Press the # or SEND
button if using an IntelFlex Desktop Transmitter .
6. The XMIT light on the
Transmitter will turn ON,
confirming the page is being sent. If using a
Remote Keypad , the Keypad XMIT light does not
ON.
7. The
Pager will vibrate, flash tone or
speak as required.
8. See “Enter Pager #” Menu Functions in your
Transmitter manual for more information.
Paging Using a Desktop Transmitter
3
3
3
3
3
7
16
15
6
5
14
3
3
3