5
C
harging and Storing Pagers
Charging Pagers
Charging Pagers:
Pagers
are turned OFF for shipment from JTECH.
When first received,
Pagers
are to be charged for a minimum of 3 hours
prior to use.
This first charge will also turn ON the
Pagers
.
To charge:
1. Insert
Pagers
into the empty
Charger
locations.
2. Once in the powered (ON)
Charger
,
each
Pager’s
LED will light:
3. The LED color indicates charging
condition.
Flashing yellow light = Battery
charge very low. Charge
needed. Do not use the
Pager
.
Solid yellow light = Charge
Needed.
Solid green light = OK to use.
The charging system is two stage, with a fast initial charge and then a final
maintenance charge.
Pagers
in use and returned to the
Charger
within 24 hours will fully charge
within three hours.
If not returned within 24 hours, charging time of up to eight hours may be
required to fully charge batteries.
Charging and Storing Pagers:
To maintain maximum battery capacity, store
Pagers
in the powered (ON)
Charger
.
If
Pagers
are left uncharged for more than 4 days, it is
recommended to disconnect the batteries until their
next use. See
“Replacing the Battery”
on page 10
for instructions.
If left uncharged for extended periods of time,
Pager
batteries can damage beyond repair and will need to be
replaced.
When charged and stored properly, a battery life of 18-24 months can be
expected before replacement is suggested.
1
0
9
8
7
6
5
4
3
2
1
20
19
18
1
16
15
14
13
12
11
1
9
8
7
6
5
4
3
2
1
2
1
1
1
1
1
1
1
1
1
