Helpful Hint: Since the display indexes past old tests stored in memory, this meth-
od is recommended only if all previous tests have been erased .
Assigned Testing Method
This method uses the default test numbers assigned to the test on the worksheet
and flip chart . The assigned numbers on the worksheet and chart correspond to
the test numbers selected on the Commander console . Therefore, Automatic
Indexing™ should not used with this method . Instead, use the “NEXT” button to
select the test number on the Commander unit that correspond to the test num-
ber on the worksheet or chart .
In this example, the test number on the display corresponds
to the pre-printed test number on the worksheet.
This method eliminates the necessity of writing the test number on the worksheet
before or during the exam as with the
Sequential Testing Method
. Also, when using
this method with Commander Downloader software, the names of the muscle
groups are automatically assigned to the tests .
Helpful Hint: You should be careful to select the proper test number before start-
ing a test, and be extremely careful not to inadvertently continue with the next
automatic test in the series . If you inadvertently begin a test at the next test num-
ber instead of the worksheet number because of Automatic Indexing™, delete the
test by pressing “REVIEW” and holding it while you press “Redo .”
9
