After assembling the trampoline, it is important that you perform the following safety checks.
Trampoline’s base structure safety checks :
Using a screwdriver, check that all the screws are tightly secured.
Look under the trampoline and check that all the springs are hooked securely to the frame
and triangle rings.
Move the trampoline around and check the sturdiness of the frame.
Using your two hands, put your body weight on one section of the trampoline and release to
check that the floor is even.
Inspect the cover pads and check if they completely cover the springs and frame.
Make sure the strings of the pads are tied securely.
Enclosure net safety checks :
Hold onto the safety net and shake it to check that all the enclosure poles are sturdy. Retighten
any pole that seem loose.
Check the safety net for any tears in the stitching or fabric.
Check to see if all safety net enclosure hooks are attached to the triangle ring under the
trampoline.
Once all the checks are performed and the trampoline has passed all the initial tests (above), then
have one person test the trampoline by jumping on the centre continuously for 5 minutes. If the tram-
poline feels sturdy then your trampoline passes the test. Congratulations, you have completed the
trampoline assembly ! Remember to abide by all the safety rules. Have fun, play safe...
PLEASE NOTE :
CERTAIN PARTS MAY HAVE TO BE REPLACED OVER TIME FROM YOUR SUPPLIER, DUE TO
WEAR AND TEAR.
- 25 -