4.
In a second step, assemble the feet to the circular frame structure.
5.
Attach the foot supports to the top frame structure using the small screws and washers (G).
The location of the holes on each side (2 middle holes) will be used to secure the safety net bars
using the spring attachment tool (H).
6.
Once finished, here is how your trampoline should look.
7.
Then put the jumping mat (C) inside, logo up. Attach a spring (D) in one of the elastic straps.
Join the other end of the spring to the frame. Use the key (H) to put the springs. Repeat the steps
directly in front where you connected the first spring. Then attach two more springs to half of the first
two springs, facing each other’s. This will ensure equal tension between each spring.
- 16 -
