Page 4/4
The Quality Connection
Name of each part:
Caution:
1)
Do not squeeze the handles with excessive force. The tools are factory
adjusted so that the ratchet will release with only about 20~30 kgf.
Excessive pressure may damage or break the dies.
2)
Be sure the wire does not come off the stripper in the upper die when
crimping.
3)
If it seems as if the cycle will not complete without excessive force stop and
remove the adjustment pin from the upper die. This will prevent the dies
from being damaged.
In line with a policy of continual product development, JST reserves the right to
change the specifications of the goods described in this manual at any time
without prior notice.
