
Page 8 of 15
MP-CB (CE)
5. Connecting the control box to a YA tool
1. Fit the foot pedal connections as shown:
2. Connect the red port on the foot pedal to number 1
footswitch connection on the MP-CB(CE) control box.
3. Connect the main port (right angle connector) on the foot
pedal to number 2 footswitch on the control box.
4. The carriage sensor should have a loop fitted between 3 and
4 as shown:
5. Connect the red port on the YA tool to press 1 on the control
box.
6. Connect the black port on the YA tool to press 2 on the YA
tool.
7. Connect the main air supply to the control box.
Stem plug 8mm
Stem reducer 4mm-8mm
Reducer elbow 4mm – 8mm