JSI JSI-UK, Installation & User'S Instructions

Page: 12 / 12

OPERATING AND INSTALLATION
– MAY 2012
WWW.JSI-UK.COM Page 12 of 12
Service
JSI-UK Glass Gas hobs are supplied with a one year warranty for parts and labour.
The warranty, after sales repairs and maintenance are done by Warranty Solutions Limited, who is
one of the largest appliance service organisations in the country.
If your registered appliance should break down due to an electrical or mechanical fault simply
contact our after sales team on.
01666 317077
Repair parts are all stocked in our service centre in Yorkshire which supports Technical Support
Services (manufacturers, engineers & end users) all over the country. Repairs are also available
outside of the warranty period but will be chargeable.
The JSI Dedicated Service Centre hours are 9am to 5pm Monday to Friday.
These products are designed by and manufactured for JSI-UK Limited in Turkey
Further information can be found at
www.jsi-uk.com
For further information contact customer.service@jsi-uk.com
TECHNICAL SPECIFICATIONS
Product Size
90cm 70cmcm
Width
860mm 680mmmm
Depth
520mm 520mm
Height (Tray)
51mm 51mm
Cut Out requirement
90cm 120cm
Width
830mm 560mm
Depth
490mm 490mm
Construction and Finishes
Toughened Schott black glass fitted with Brahma gas valves,
Full touch control and iron pan supports and clock.
Electrical supply for ignition
220-240v a.c. 13A fused switched supply
Operating Power Consumption
30VA
Operating Temperature Range
-10c - +85c
Protection
IP 00
Sabaf Burner Injector Data (Triple)
LPG G30 Natural Gas G20
Injector marking 90 Injector Marking 130
Power 3.80Kw Power 3.80Kw
Rate 236 g/hr. Rate 0.278m²/hr.
Sabaf Burner Injector Data (Rapid)
LPG G30 Natural Gas G20
Injector marking 85 Injector marking 115
Power 3.00Kw Power 3.0Kw
Rate 224g/hr. Rate 0.264m²/hr.
Sabaf Burner Injector Data (Semi Rapid)
LPG G30 Natural Gas G20
Injector marking 65 Injector marking 97
Power 1.75Kw Power 1.75Kw
Rate 130g/hr. Rate 0.166m²/hr.
Sabaf Burner Injector Data (Auxiliary)
LPG G30 Natural Gas G20
Injector marking 50 Injector marking 72
Power 1.00Kw Power 1.00Kw
Rate 71g/hr. Rate 0.091m²/hr.