53
CPU(V)
This field will show the detected voltage of the processor.
+1.5V, +3.3V, +5V, +12V, -12V, -5V, VBAT(V) and 5VSB(V)
These fields show the output voltage of the power supply.
Shutdown Temperature
You can prevent the system from overheating by selecting a temperature in this field. If the
system detected that its temperature exceeded the one set in this field, it will automatically
shutdown. This function will work only when you enable this function in the Hardware Monitor for
Windows utility.
3.1.8 CPU Frequency Control
The settings on the screen are for reference only. Your version may not be identical to this one.
CPU Clock Ratio
This field is used to select the CPU’s frequency ratio.
Important:
The frequency ratio of some processors may have been locked by the manufacturer. If you are
using this kind of processor, setting an extended ratio for the processor will have no effect. The
system will instead use its factory default ratio.
Auto Detect PCI Clk
When enabled, the system will automatically send clock signals to existing PCI devices.
Spread Spectrum
Leave this field in its default setting. Do not alter this setting unless advised by an engineer or
technician.
CPU Clock
This field provides several options for selecting the external system bus clock of the processor.
The available options allow you to adjust the processor’s bus clock by 1MHz increment.
Important:
Selecting an external bus clock other than the default setting may result to the processor’s or
system’s instability and are not guaranteed to provide better system performance.
