15
8.
Hardware settings
8.1
CARD ID setting
Since PCIe cards have plug and play function, the card ID is required for programmer to
identify which card he/she will control without knowing the physical address assigned by the
Windows. A 4 bits DIP switch or rotary switch for distinguishing the 16 identical card s.
The following example sets the card ID at 12.
Example for card ID setting
Rotary switch set at ID=0
8.2
Jumper setting
JP0,JP1
1-2 short Pull High
2-3 short Pull Low
Jumper JP0 and JP1 is used for the TTL output default state, if you disable the TTL port or at
computer start-up period, the default state will be output. Select the one to match with the
succeeding circuit.
JP2
Warm reset jumper (JP2)
Reset output after warm reset Keep output after warm reset
