Multi Printer
19
TIMER MODE
Prints at a configured time interval.
The interval time can be set within a range of 5 second to 1 hour.
If electronic scales/balances operate unusually for more than 6
seconds, “DATA ERR” is displayed on the screen and blinks the
message.
Setting interval time
e.g.) Set the interval time to 30 seconds.
1) Enter TIMER MODE (See pg 13)
2) press buttons in the sequence
of “3”,”0”(Second),”0”,”0”(Minute)
3) The screen displays as below:
To save, press "ENT" key.
-
If
numbers are pressed incorrectly, press “ESC” to clear
the values and return to the initial setting screen.
e.g.)
Setting Screen Waiting Printing Data error
NORMAL MODE
This mode is
identical to AND’s GLP MODE( Good Laboratory Practice).
In this mode, printing contents include the manufacturer, model name, model
S/N, ID number, date, time and signature space in compliance with GLP.
Calibration and calibration test include information of calibration weights and
test results.
ID numbers can be used for identifying electronic scales/balances during
maintenance. .
e.g.)
Before Printing Printing After printing
TIME SET
M:S00:00
NextTime
13:58:30
NextTime
PRINT
REN
NextTime
DATA ERR
TIME SET
M:S00:00
NORMAL
READY
NORMAL
PRINT
NORMAL
READY
TIME SET
SAVE? E
