©JRI
3
I.
INTRODUCTION
Congratulations, you own SPY RF TesT ! With its software, with the Spy RF ModeM TesT this device enables you to
determine precisely the position of your SPY RF recorders in an installation.
Indeed, the presence of obstacles (walls, partitions, furniture, people, diverse objects…) on the radio waves path between a
modem and a recorder weakens the signal, what could disturb an effective radio transmission. The nature and thickness of
crossed walls must be taken into account. It is to notice that the thickness of an obstacle should be measured in the radio
signal direction: it is harder for a radio signal to cross a wall obliquely than perpendicularly.
a)
Equipment
1 SPY RF Test
1 User manual
b)
Symbols
II.
PRÉSENTATION
a)
Display
b)
Complementary information
RECYCLING : do not throw in a rubbish dump or in a domestic waste container. Comply to the regulation to throw away the device.
POWER SUPPLY : this device is powered by a cotinuous current delivered by a main power supply adaptor (230VAC). Comply to the
security and utilization regulations of electric power. Use a an electric installation complying to these regulations
CE MARKING :this equipment is certified to comply with the European regulation for the electric security, inflammability, disturbing
radiation emission and immunity to surrounding electric disturbances.
FCC ID: W45 03330
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation
In accordance with FCC requirements, changes or modifications not expressly approved by JRI could void the user's
authority to operate this product.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense
Low battery. You must change it.
Pushbutton
Display
Battery
cover
Indication of the radio reception
level
In %
Bar graph
