MoyerCam User Manual - Page 32
The image is not showing correctly.
We have adjusted the settings for the Camera and Projector so that the image will appear correctly.
However, we can't guarantee that somehow these setting will never change, especially if buttons are
pressed inadvertently. (Be especially careful handling the Camera - see page 10.) If the image doesn't
look correct, it's more likely that the Camera settings have changed -- start there, and if the image still
isn't correct, move on to the Projector.
Camera Settings. We will start with the easiest fix and move to the more difficult ones:
Fix #1: Turn off the camera, wait about 10 seconds, and then turn it back on. If that does not
solve the problem, go to Fix #2.
Fix #2: Disconnect the Camera from the Camera Stand. Take out the battery and the SD card (see
GoPro manual for instructions.) Wait about 10 seconds. Reinsert the battery and SD card.
Turn the Camera back on. If that does not solve the problem, go to Fix #3.
Fix #3: Detailed adjustments. There are three methods you can use to adjust Camera settings:
1- via the Camera Status Screen on the front
2- via the Touch Display on the back
3- wirelessly with a smart phone.
Please refer to the GoPro manual to choose your desired method. Then make sure the
Camera's settings are as follows:
VIDEO SETTINGS
Resolution: 720
Frames Per Second: 120
Field of View: Narrow
Low Light: Off
Spot Meter: Off
Protune: Off
PHOTO SETTINGS
-- not applicable --
MULTI-SHOT SETTINGS
-- not applicable --
SETUP
Wireless: Off (unless you use a smart phone to set settings)
Orientation: Down
Default Mode: Video
Default Video Sub Mode: Video
QuickCapture: Off
LED Blink: Off
Beeps: 70%
Video Format: NTSC
On Screen Display: Off
Auto Off: Never
Wireless Mode: Smart
Projector Settings. Please refer to the InFocus Projector's manual for instructions on how to change the
Summary of Contents for MoyerCam
Page 28: ...MoyerCam User Manual Page 28...
