©JRI Maxant
25
Right click on Properties
The tab « Driver » shows the driver version in use.
To modify the driver of the Digi Connet ME module :
Select « Driver Update »
Choose the location where you have previously stored files (CD or USB key eg)
After updating the Driver, reboot of the PC is required. Otherwise programming § 4.3 is not available.
4.3 - Programming the response time
This adjustment is necessary as it is often the cause of a slow communication.
Right click workstation
properties
tab “material”
(or Control Panel + equipment).
Select « device manage r ».
In « multiport card », select the DIGI you need to program
Right click on Properties
Select the tab “Advanced” and click on “properties” in the lower right corner
Select « port 1 », then “Set Profile”
