manualshive.com logo in svg

JRC NWZ-4610, Instruction Manual

Share
Download
JRC NWZ-4610 Instruction Manual Download Page 30

 

4-8 

 

 

4.2. 

Basic Operation 

 

4.2.1. 

Turning on the power 

 

When the main power is turned on, the power to the display unit is automatically turned on. 

In the state in which the power is turned off by the display unit key operation, pressing the 

 key 

turns on the power. 
 
  When the main power is OFF 
 
 
 
 
 
 
 

Turning on the main power 

 
 
  When the main power is ON 
 

Turning on the power 

 
 
 
 
 
 

Pressing the power key 

 
When the power is ON for first time. 
 The following screen is displayed. Select a Model with      and press      . 
 
 
 
 
                                                       Model 
 
 
 
When "LOG" is selected wrong 
  Refer to "Caution" in "4.9.2 setting a model". 
 
 
 
 
 
 
 
 

4.2.2. Starting 

(Normal) 

 

If all the self-check results are ‘OK’, the screen is automatically changed to the normal screen. 
 
 
 
                                                                                All OK 
 
 
 
 

 
If the power cannot be turned on, check the main power of the power distribution board and the 
cable connection to the display unit. 

 

Caution

 

JRC 

ENT

ON 

 

Summary of Contents for NWZ-4610

























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands