7/12
Name Remarks
⑤
ANT1
It is a connector which connects an antenna.
（
Main
）
⑥
ANT2
It is a connector which connects an antenna.
（
Sub
）
⑦
CONSOLE
It is a connector which connects maintenance PC.
⑧
10/100BASE-T
It is a connector which connects Ethernet.
⑨
DC +5V
A power supply is connected and a power supply is
supplied to equipment.
This connection is unnecessary when supplying a power
supply by PoE.
⑩
CLR
It is a switch which initializes a setup.
The power supply of this equipment is switched on
pushing the "CLR" button.
If it is continuing pushing the "CLR" button, the "PWR"
lamp will change from "green" to "orange" for 1 second.
Then, equipment returns to initial setting.
２．
Login
The IP address initial value of wireless LAN is set as "192.168.1.1/24."
Here, the login method in case the IP address of this equipment is
"192.168.1.1/24" is shown.
Please read a user's manual about the command for setting change,a
display, and an examination of this equipment.
①
Login
PC which logs in to this equipment is prepared.
The IP address of PC is changed into "192.168.1. x/24" so that PC
can communicate with this equipment. However, the value of "x" is
2 to 254.
②
PC If a setup of PC is completed, this equipment will be connected
with PC by cable. If it connects with PC normally, the "E-LINK" lamp
will light up.
（1）
User account
The following user names and passwords are set up in the initial state.
Please change a password at the time of the first login for security
protection.
User name
Password
Authority
admin
admin
Setting change / setting display
user
user
Setting change (only password) / setting
display
