JRC JMA-9110-6XA, Instruction Manual

Page: 228 / 280

3 － 108
JMA-9100 Instruction Manual
>
3.BASIC OPERATION
>
3.8 APPLIED OPERATIONS
3.8.8.5 TEMP Graph Setting
•
The TEMP Graph Setting menu will appear.
[1]
TEMP Graph Display
• Determine whether to display the graph of the water-temperature data that has
been received on the radar display.
• One of two digital information areas is used to display data.
• When the water-temperature graph is displayed, the sizes of the target tracking
(TT)/AIS numeric data display areas are exclusively decreased.
• Left-click the button located at thelower righit of the display. The
water-temperature graph display function is switched between On and Off.
[2]
TEMP Graph Color
• Set the color for the water-temperature graph.
• There are eight selection items:
, , , , , ,
[3] TEMP Range
• When Color is selected for the display color for the water-temperature graph,
set the temperature range of each color.
[4]
Time Range
• Set the time range for the water-temperature graph.
: The water-temperature graph is not displayed.
: The water-temperature graph is displayed in digital information area 1.
: The water-temperature graph is displayed in digital information area 2.
: The time range is set at 10 minutes.
: The time range is set at 15 minutes.
: The time range is set at 30 minutes.
: The time range is set at 60 minutes.
: The time range is set at 12 hours.
Target
Off
Area1
Area2
White Gray Blue Green Yellow Pink Red
10min
15min
30min
60min
12hour