JRC JMA-9110-6XA, Instruction Manual

Page: 130 / 280

3 － 10
JMA-9100 Instruction Manual
>
3.BASIC OPERATION
>
3.2 OBSERVE AND ADJUST VIDEO
3.2.5.2 Using the automatic sea clutter suppression mode
The sea clutter suppression in accordance with the intensity of sea clutter is
possible. Use this mode when the sea clutter's intensity differs according to
directional orientation.
Procedures
1) Press the [SEA] dial. Alternatively, Left-click the Sea MAN
button located at the lower left of the display.
The automatic sea clutter suppression mode is selected, and Sea AUTO is displayed in the
lower left of the radar display.
2) Make adjustments by turning the [SEA] dial.
Even when the automatic sea clutter suppression mode is selected, turning the [SEA] dial can
make fine adjustments manually.
Cancel
1) ress the [SEA] dial. Alternatively, Left-click the Sea AUTO
button located at the lower left of the display.
The automatic sea clutter suppression mode is cancelled, and Sea MAN is displayed in the
lower left of the radar display.
i
It is recommended to restore the setting to
the factory default, if you lost the appropriate
settings.The factory default level is shown on
the bar chart as a green line.
The factory defafult level is assigned by
every function mode. See the Section 3.9
"USE FUNCTION KEY [USER]"
NOTE:
When the automatic sea clutter suppression mode is selected,
the automatic rain/snow suppression mode is switched to the
manual mode.
To select both the sea clutter suppression function and the rain/
snow suppression function in the automatic mode, use the
automatic rain/snow suppression mode.
Current Level
Factory Default