JMA-5300Mk2 series
– syst
em fl
exibility
Flexible black box configuration
The processor unit is the heart of the JMA-5300Mk2, and shares the same simple confi guration as
its predecessor, contributing to an enhanced system confi guration. Optional TT (Target Tracking)
function module with up to 100 targets, and or AIS interface, plotter control unit can be built in.
CCRP
As set by IMO regulations, a Consistent Common Reference Point (CCRP) is a location on own ship,
to which all horizontal measurements, such as target range, bearing, relative course/speed, closest
point of approach, or time to closest point of approach are referenced.
Where multiple antennas are installed, diff erent
position off sets for each antenna in the radar
system should be applied with respect to the CCRP.
If you switch between scanners (up to 8 possible
- option), the information displayed is generated
allows for consistency and uniform output. This
new feature is easily accessible from the menu.
Wide dynamic range receiver
The new JMA-5300Mk2 series integrates a wide dynamic range receiver
that, compared to conventional models, signifi cantly improves the
diff erentiation of noise and targets under sea clutter. The radar system
overcomes diff erent sources of unwanted signals, maintaining a
constant level of overall visible clutter.
Saturation
of noises on
receiver
Wide
dynamic
range
More powerful than ever
The JMA-5300Mk2 incorporates three Tornado™ processors, which are exclusively
developed and designed by JRC, bringing a new level of performance and reliability
to radar operation. The new Tornado™ processors, which equal the power of twelve
conventional processors, and advanced system architecture make the JMA-5300Mk2 series
probably the most sophisticated radar available today.
Interswitching
Optional interswitching up to 8 displays possible.
What’s standard in the box?
1. Display
1
2. Scanner
3. Keyboard
4. Processor
5. Cables
6. Spare parts
7. Manual (English)
Which cables?
Std.
Max.
Display to processor
1
5 m
5 m
Keyboard to processor
5 m
25 m
Scanner to display (10/25kW)
30 m
65 m
Scanner to junction box (30kW)
40 m
50 m
2
Junction box to diplay (30kW)
20 m
30 m
2
Power cable for processor
5 m
5 m
Power cable for display
5 m
5 m
1
not included in black box confi guration
2
total distance between scanner and display must not exceed 65m
standard
with optional I/S box
