JRC JCY-1850 -, Instruction Manual

Page: 18 / 73

1. Operation
4
1.3 Starting and Stopping the System
1.3.1 Starting the System
ATTENTION
To operate the
Recording Control Unit
, the
front door
has to be unlocked and
opened.
y
To turn on the equipment, after all units are connected, follow the procedure described below.
1. Starting the Recording Control Unit
1) Unlock the front door with the key and open it.
2) Turn on the
Power Supply Unit
.
3) Then the
POWER LED
on the
Power Supply Uni
t lights up.
4) The
CARD LED
on the
Main Control Board (MCB)
lights up.
5) The
REC LED
on the
Main Control Board (MCB)
lights up.
2. Starting the Operation Panel Unit
The
Power Supply Unit
in the
Recording Control Unit
supplies power to the
Operation Panel
Unit
.
1) When the
Power Supply Unit
in the
Recording Control Unit
is turned on, the
POWER LED
on the
Operation Panel Unit
lights up simultaneously.
2)
T
he
Recording LED
on the
Operation Panel Unit
lights up after several seconds.
3. Start the Protective Capsule Unit
The
Power Supply Unit
in the
Recording Control Unit
supplies power to the
Protective
Capsule Unit
. When the
Power Supply Unit
in the
Recording Control Unit
is turned on, the
Protective Capsule Unit
is activated simultaneously.
4. Starting the Microphone Unit
The
Audio Recording Board
in the
Recording Control Unit
supplies power to the
Microphone
Unit
. When the
Power Supply Unit
in
the Recording Control Unit
is turned on, the
Microphone
Unit
is activated simultaneously.
5. Starting the Option Unit
The option unit means
Radar Interface Unit
. The
Recording Control Unit
supplies AC power
to the option unit. When the
Recording Control Unit
is on, the option unit is also turned on.
The power switch of option unit should always be set to ON.
5.1 Radar Interface Unit
Set the
POWER SWITCH
on the front panel to ON.