■
COMPONENTS
135
φ
126
φ
40
1"-14 UNS-2B
（
Unit:mm
）
■
SYSTEM CONFIGURATION
■
OUTLINE DRAWING
JLR-4331E
6-pin connector
(6-282-6SG-522)
option
FF30
FF50
JFV-250
RADAR 1000
RADAR 1500
RADAR 2000
RADAR 3000
NWU-800
PLOT 700FX
J-NAV 500
NWZ-4570
JRC Radar
JRC Fish Finder
JRC Plotter
JRC GPS Display
Name
DGPS Receiver
Instruction manual
No.
1
2
Type
JLR-4331E
Remarks
include 15m cable
Q'ty
1
1
●
Option :15m
Extension Cable CFQ-8773
Seattle Branch :
1011 SW Klickitat Way, Bldg. B,
Suite 100, SEATTLE WA 98134, U.S.A.
Tel1(206)654-5644
Facsimile: +1(206)654-7030
Homepage:http://www.jrcamerica.com
JRC (UK)Limited :
1st Floor, Friars House,
157/168, Blackfriars Road,
London SE1 8EZ, U.K.
Tel44(0)20-7261-1188
Facsimile: +44(0)20-7803-0996
DGPS 212
DGPS RECEIVER
(JLR-4331E)
Weight: less than 1.7kg
●
Specifications subject to change without notice.
For further information, contact:
Since 1915
Printed in Japan
2000.5
CAT.No.Y3-130（No.432-1-3）A
Main Office:
Akasaka Twin Tower(Main), 17-22,
Akasaka 2-chome, Minato-ku, Tokyo 107-8432, JAPAN
Telephone: Tokyo(03)3584-8833
Facsimile: Tokyo(03)3584-8757
Overseas Branches : Seattle, London
Liaison Offices : Kaohsiung, Manila, Bangkok,
Singapore, Jakarta, New Delhi, New York, Rotterdam,
Piraeus, Las Palmas
19EM
ISO
9001
，
ISO
14001 Certified
URL
Caution
Before attempting to operate this unit, read the instruction
manual thoroughly to correctly and safty operate the unit.
■
FEATURES
Internal Differential Beacon Receiver
The DGPS 212 includes a Beacon Receiver and a GPS Receiver.
By using DGPS you can achieve true DGPS accuracy.
12-Channel Parallel for Receiving 12 Satellites
Simultaneously
The DGPS 212 is designed to simultaneously receive signals from
12 orbiting satellites, ensuring the most accurate positioning.
Quick Position Fixing
Typically 45 seconds for first position fixing without GPS almanac
data.
Conversion to NMEA0183 Output
Since the NMEA0183 output data is changeable between version
1.5 and version 2.1, you can connect the DGPS 212 to various
Marine Electronics Equipment such as Marine Radars,Fishfinders,
Plotters, or others.
PPS Signal Output
The DGPS 212 outputs a pulse per second which coincides with
UTC second precisely. It can be used as a precise clock.
■
SPECIFICATIONS
GPS Specifications
Receiver type
:Multichannel (12-CH) all-in-view
Frequency
:1575.42MHz
±
1MHz (C/A code)
Sensitivity
:-130dBm for acquisition, -133dBm for tracking
Accuracy
:15mRMS(C/A code, HDOP
＜
4)
5m RMS when DGPS corrected
Time to first fix
:Typically 45 seconds (cold start fix)
Typically 30 seconds (warm start fix)
Position update
:Normally every 1 second
Beacon Specifications
Receiving frequency :283.5kHz to 325kHz
Dynamic range
:More than 90dB
Demodulation
:MSK (Minimum Shift Keying)
Data bit rate
:50,100,200bps
General
Data output
:NMEA0183 ver.1.5 or 2.1 selectable
ver1.5
GGA, RMC, GLL, VTG,
PJRCDGP0,PJRCDGP1,
PJRCDGP2
ver2.1
GGA, RMC, GLL, VTG, GSV, GSA,
PJRCDGP3, DTM, MSS
PPS signal output
:positive pulse, 15
μ
sec width
Geodetic datum
:46 (WGS-84, WGS-72, Japan, America,
Canada/Alaska, Europe, Australia,
England, NAD-83, other 37 selectable)
Input voltage
:10.8
〜
16VDC (less than 5W)
(Power Consumption)
Data cable
:6-core cable,15m
Operating temprature :-25
℃
to 55
℃
Water proof
:USCG CFR-46/IEC60945
