49 | Operation
2.5.2.10 Wind Settings (WIND SET)
The Filter in Wind Settings is designed to dampen fluctuations in wind speed and direction depending on weather
conditions and location of the wind sensor. Wind Settings allows for fine tuning the Wind Sensor.
To make the appearance of the direction indication on the display calmer, a filter can be applied to the wind direction.
The value of the Filter determines the stability on the display. The higher the value, the calmer the wind direction
indication will appear.
Figure 49: Wind Settings Menu
1. In the MENU, touch the ADV SET button.
The PASSWORD screen appears.
2. Key in the password and confirm with the
√
button.
The ADVANCED SETTINGS MENU appears.
3. Touch the WIND SET button.
The WIND SETTINGS MENU appears, see Figure 49: Wind Settings Menu on page 49 .
4. Set the desired time in seconds and touch the
√
button to confirm.
The ADVANCED SETTINGS MENU appears again.
2.5.2.11 NMEA Settings ( NMEA SET )
The AlphaLine instrument is able to transmit NMEA sentence to the external listener.
In this software version, it only supports the sentence VBW and DDC. To set up the output settings, execute the following
procedure:
Summary of Contents for AlphaWind AlphaLine MFL
