7
XP652 MANUAL Quick Start
QUICK START
HELICOPTER
Travel Adjustment
Pitch Curve
Revolution Mixing
MODE
ENTER
CHANNEL
Press the MODE button until
TRV ADJ. appears on the screen.
8
–I00
%
A I L
TRV ADJ.
INCREASE
CLEAR
+
–
DECREASE
MODE
ENTER
CHANNEL
Press the
CHANNEL
button to select
the channel you
want the travel
adjusted on.
To decrease the
travel, move the stick
(i.e. aileron) to the
right then press the
DECREASE button
to adjust the right
travel. Release the
DECREASE button
and move the same
stick to the left. Press
the DECREASE
button to adjust the
left travel.
To increase the
travel, move the stick
(i.e. aileron) to the
right then press the
INCREASE button to
adjust the right
travel. Release the
INCREASE button
and move the same
stick to the left. Press
the INCREASE
button to adjust the
left travel.
9
–I02
%
A I L
TRV ADJ.
INCREASE
CLEAR
+
–
DECREASE
MODE
ENTER
CHANNEL
Press the MODE button
until PLN appears on
the screen.
10
0
%
MODE
ENTER
CHANNEL
Press the CHANNEL
button to select stick
position (point location).
Press the INCREASE or DECREASE
button to adjust the point value at the
selected stick position.
11
MODE
ENTER
CHANNEL
Press the MODE
button until Mix
RVU appears on
the screen.
Revolution mixing value
can be set for up or down.
Press the CHANNEL
button until U or D
appears on the screen.
Press the INCREASE button
to set the desired value of
the up and down positions.
A good place to start is
35% up and 35% down.
To change the direction of the
mixing value press the
INCREASE and DECREASE
buttons simultaneously.
12
– 0
%
R
V
U
MIX
0
%
STICK POSITION
(POINT LOCATION)
L = Low
2 = Center
H = High
PRE-SET VALUES
L =
0%
2 = 50%
H = 100%
RECOMMENDED INITIAL PITCH
SETTINGS
(Please refer to your helicopter kit
instruction for pitch settings if available)
L = 0° Pitch
2 = 5° Pitch
H = 9° Pitch
INCREASE
CLEAR
+
–
DECREASE
INCREASE
CLEAR
+
–
DECREASE
INCREASE
CLEAR
+
–
DECREASE
Press the
CHANNEL button
to select the
channel on which
you want the
travel adjusted.
