JR XF421EX, Manual

Page: 16 / 32

ON
TRAINER
SCROLL
CHANNEL
- DECR
ENTER
AUX.CH.
+ INCR
ENTER
To enter Systen Setup Mode
press both programming
buttons up and turn on the
Power Switch
Power Switch
RST
I
ON
TRAINER
SCROLL
CHANNEL - DECR
ENTER
AUX.CH.
+ INCR ENTER
To enter Function Mode
turn on the Power Switch
and then press both
programming buttons up
Power Switch
THR
-
REV•NORM
16
XF421EX MANUAL • CHAPTER 5: Input Mode and Functions
To enter the Function Mode, turn on the transmitter. Press the
SCROLL and +INCR buttons up simultaneously until a beep is heard.
The display will change accordingly and show the last active function.
Press the SCROLL button up to scroll down through the functions one
by one as shown in the flowchart at left. Once the appropriate
function is selected, use the CHANNEL button to select the
appropriate channel. Use the INCREASE and DECREASE buttons to
adjust the values displayed on the screen.
CHAPTER 5 : Input Mode and Functions
continued
FUNCTION MODE 5.3
THR
-
REV•NORM
SERVO REVERSING
Page 23
SUB-TRIM
Page 24
TRAVEL ADJUSTMENT
Page 25
0
THR
SB-TRIM
+I00
%
THR
TRV ADJ
To enter the System Mode, press the SCROLL and +INCR buttons up
simultaneously while you turn on the transmitter. You can now select
any of four system mode functions shown here in the flow chart. To
exit the System Mode, press the SCROLL and +INCR buttons
simultaneously or turn off the transmitter. Press up the SCROLL
button to move through the System Mode functions. Information for
each function is located on the page number listed next to the
function name.
SYSTEM MODE 5.3
MODEL NAME ENTRY
Page 22
WING TYPE
SELECTION
FPR FLAPERON
DELTA
V-TAIL
Page 20–21
RST
DATA RESET
Page 18
MODEL SELECTION
Page 19
I
MDL
OF
WNG
MIX
I
I
MDI
MIX
Programming Button Programming Button
Programming Button Programming Button