5-2
35
CCPM Servo Centering with the Sub-Trim Function
1. XP652 SYSTEM
1) With the radio power switch on, press the
Mode
and
Channel
keys simultaneously to enter the function mode.
2) Press the
Mode
key until “SB-trim” (sub-trim) appears on the screen.
3) Adjust the left (aileron), right (Aux 1), and front (elevator) servos as needed until the servo arm is exactly parallel to the
servo as shown when the collective stick is in the center position. It will be necessary to press the
Channel
key to access the
necessary channels to be adjusted.
4) Press the
Mode
and
Channel
keys simultaneously to exit the function mode.
CHANNEL
CHANNEL
sb-trim
ail
0
Increase or decrease value to center the left servo.
sb-trim
ele
0
Increase or decrease value to center the front servo.
sb-trim
pit
0
Increase or decrease value to center the right servo.
2. XP8103, XP8103
1) With the radio power switch on, press the
Up
and
Down
keys simultaneously to enter the function mode.
2) Press the
Up
key until “Sub Trim” appears on the screen.
3) Adjust the left (aileron), right (Aux 1), and front (elevator) servos as needed until the servo arm is exactly parallel to the
servo as shown when the collective stick is in the center position. It will be necessary to press the
SEL
key once to access
the right servo (Aux 1) sub-trim.
4) Press the
Up
and
Down
keys simultaneously to exit the function mode.
[Sub Trim]
£THRO
∞AILE
0
0
ELEV
RUDD
0
0
[Sub Trim]
£GEAR
∞ PIT.
0
0
AUX2
AUX3
0
0
Increase or decrease
the value to the center
of the front servo.
Increase or decrease
the value to the center
of the right servo.
Increase or decrease
the value to the center
of the left servo.
SEL
3. JR PCM10, 10S, 10SX, 10SXII, 10X SYSTEMS
1) Enter the sub-trim function (code 15).
2) Adjust the left (aileron), right (Aux 1) and front (elevator) servos as needed until the servo arm is exactly parallel to the servo
as shown when the collective stick is in the center position. It will be necessary to press the
Page
button to access the right
servo (Aux 1) sub-trim value.
3) Press
Enter
to exit the sub-trim function.
[SUB TRIM]
THRO
AILE
ELEV
RUDD
GEAR
0
0
0
0
0
ENTER
PAGE
+
–
CL
+
–
CL
+
–
CL
+
–
CL
+
–
CL
Press
Page
to
access the second
screen.
Increase or decrease
the value to the center
of the left servo.
Increase or decrease
the value to the center
of the front servo.
[SUB TRIM]
PIT.
AUX2
AUX3
AUX4
AUX5
0
0
0
0
0
ENTER
PAGE
+
–
CL
+
–
CL
+
–
CL
+
–
CL
+
–
CL
Increase or decrease the value to
the center of the right servo.
It may be necessary to make minor servo centering adjustments with the use of the sub-trim function to achieve the
desired servo arm positions. Please refer to your particular radio’s section as listed below or consult your radio instruction
manual for more information.
