YDFLP-C-30-M7-S-X user manual
File Number: EFLP001-B
Shenzhen JPT Opto -Electronics Co. Ltd.
Version :B Date:2020. 8
17
4.2 Introduction
1. JPT laser GUI software has: laser control, setting the default parameters, operation tips,
prompt feedback, setting the control mode and the alarm monitoring. In addition, DB25 interface
monitoring and internal parameter monitoring functions are available in GUI.
2. The parameter setting of the software is with immediate effect, do not need to restart the laser.
3. Default parameters and control mode setting have the function of saving data automatically
after power down.
4. Only can set the power parameters in the laser control bar during emission, (including DB25
and GUI ), other settings are not allowed during emission, or there will be prompt warning tip
as the below figure.
