Interoperability Now!
7-1
7
NXU-2B Firmware Update
7.1
NXU-2B Firmware Update Procedure
From time to time JPS Interoperability Solutions may make firmware updates available for the
NXU-2B. These updates may fix software defects or add new features. Any software updates
will be available via the JPS web page at
To update the NXU-2B firmware you will need to access the NXU-2B via a web browser.
Browse to the IP address of the NXU-2B and select the Information link. From the Information
page select the Security link. The security link is only available from the Information page. On
the Security page you can set the administrative username and password, and you can also
update the NXU-2B software by clicking the “Software Update” button. You will see the
following page:
Figure 7-1 Firmware Upload
Click on “Browse” and browse to the location on your computer where you saved the firmware
image. The firmware file will have the form of “NXU2B_xxx.bin” where xxx will reflect the
version number. Select this file and click “Open” in your browser. Make sure this is the file you
want to load, and then clock “Send File” in the NXU-2B firmware upload page. The browser
will display “Program success!” and the NXU-2B will reboot. After the reboot the unit will be
running the updated firmware. Browse to the NXU-2B IP address and verify that the firmware
version reported is the same as the firmware you uploaded.
Note: The NXU-2B and computer should be connected to a reliable power source
throughout the firmware update procedure. If the power is interrupted during the
firmware update process the unit might be rendered non-functional.
Summary of Contents for NXU-2B
