JPS JMD-STD-90A, User Manual

Page: 56 / 149

www.jps.com.tw
55
10.7 Analog Output Group

Pr.100

Analog Output AO1 Data Select

Pr.103

Analog Output AO2 Data Select
Setting Description Memo
0 Vout = 0V
1 Vout = +2000 mV
2 Vout = -2000 mV
3 Vout = by RAM-SET1
4 Vout = by RAM-SET2
5 Vout = by EAROM-SET1
6 Vout = by EAROM-SET2
16 Vout = Vcmd, (Max. Speed=Pr.203, MOTION only) Only For Motion Type
21 Vout = Rpm(absolute), Max Vout when Rpm=Pr.203
22 Vout = Rpm(signed)
23 Vout = Motor-Torque(absolute), Max Torque=Pr.088
24 Vout = Motor-Torque(signed)
【Note】 JUPITER models based on capacity, the mix of different AO output hardware,
refer to the following instructions ：
※ 【1HP~3HP Type：】

 Use with the I / O board, you can achieve the output v10 V
※ 【> 3HP Type:】

 Use without I / O board, you can achieve the output v10 V