Z2 Controller Operations Manual
Z2C Installation and Operation Manual
2-4
Interoperability Now
2.7
Power Source
The power supply included with the unit operates from input voltages and frequencies of 100 to
240 VAC, 50 - 60 Hz. Other standard “laptop-type” supplies can be substituted, but must provide
a nominal +12 VDC, and be capable of at least 1.5 amp output. Note that the power supply
included in the Z2 Controller accessory kit is a premium version with a 1500V isolation
transformer.
2.8
Safety Precautions and Procedures
The Z2 Controller is operated by a +12 VDC power supply and therefore any high-level power
supply voltage exists only on the AC input side of the power supply. Standard precautions relative
to 115 or 230 (nominal) AC wiring applies.
Note: The Z2 Controller contains no user-serviceable components and
there is no reason to disassemble the unit.
Return the Z2 Controller to the factory for servicing.
2.9
Maintenance
The Z2 Controller contains no user-serviceable internal components, and no hardware
maintenance is required.
Consult the JPS Interoperability Solutions website for firmware updates. Refer to Firmware
Update Section 3.3.2 in this Manual for more detail regarding the update process on the Z2
Controller.
End of Section Two