Z2 Controller Operations Manual
Interoperability Now
2-3
Z2C Installation and Operation Manual
2.6
Connectors, Controls, and Indicators
Basic configuration and control of this Z2 Controller is via its browser-based GUI.
On the Z2C front panel are:
•
The power on/off switch
•
A USB port that can be used for configuration and with JPS-specified USB wired and
wireless headsets. See Optional Equipment: Not Supplied, Section 1.5
•
Power and Fault LEDs
On the Z2C rear panel are:
•
RJ-45 Ethernet port
•
+12 VDC power jack
•
USB port (same functions as front panel USB port)
•
HDMI port
•
D9 RS-232 port
The HDMI and RS-232 ports are used with different versions of the hardware.
Figure 2-2: Z2 Controller Front and Rear Views