46
We recommend to alternate it with the
Nourishment program your face has a tendency
to become edematic.
To conduct treatment in this mode, use the tissue
mask moistened with a saline solution, for example
in the physiological solution (0,9 % NaCl solution)
or 1 % Karlsbad salt solution.
5.7. Mode combination during the procedure
We recommend to use one of the unit modes
during the procedure. It needs to be decided
separately in each case whether it makes sense
to use two modes in consequence during one
procedure, depending on the treatment effect
and individual sensitivity of each patient.
Please adhere to the recommended
treatment schemes. If you apply the unit too
frequently, this may cause skin irritation.
5.8. Preparation of the unit for the procedure
Before using the unit, make sure that there are
no impact marks on its case and the liquid crystal
display of the unit is not damaged. Make sure that
there are no traces of foreign materials or signs of
damage on the cuff electrode and on the mask
electrode.
Do not use the unit if it is damaged.
Do not use the mask electrode if the
conducting layer is damaged (change of
colour or mechanical destruction).
5.8.1.
If there are no batteries in the battery
compartment, install the batteries. When installing
the batteries, make sure you observe the correct
polarity.
5.8.2.
Before the first use, wash the cuff electrode
and the mask electrode with soap solution.
Wash off the remaining soap with running water.
Remove the remaining moisture with dry tissue.
5.8.3.
Put the mask electrode in front of you with
the decorative side down.
5.8.4.
Connect the cable to the mask electrode.
5.8.5.
Slightly moisten the skin on the back surface
of your forearm. Fix the unit on your arm, making
sure that it fits tightly on your moistened skin.
