Make sure to read this guide carefully and review the warnings and battery-handling instructions
in the full instruction manual prior to setting up and using the product.
How the Collar Works
This collar has seven sensitivity levels and uses sound and vibration to deter barking. As your dog
barks, the collar progressively cycles through combinations of sound and vibration until your dog’s
eighth bark, when the collar enters a 1-minute sleep period for your dog’s safety. Make sure you start
at the lowest sensitivity level (1) and work your way up as needed.
DO NOT PUT THE COLLAR ON YOUR DOG WITHOUT TESTING THE COLLAR FIRST.
Components
NO-SHOCK DOG BARK COLLAR
1. Hold the collar with the probes facing you.
3. Repeat 3 more times.
You should hear a beep, see the light and feel a moderate vibration.
2. Blow a small puff of air at the hole.
You
should hear a beep and see
the indicator light.
Testing the Collar
Locate the sound hole between the probes. This is where the collar listens for your dog’s barks.
Adjusting the Sensitivity
The collar comes pre-set to the fourth sensitivity level. Adjust it using the + and – buttons
on the side of the collar. Listen for a beep while you adjust the level. If you don’t hear it,
you’re at the highest or lowest level.
If you have a long-haired dog, you should change the probes to the longer probes.
Use the test bulb tool to loosen and tighten the probes. It fits over the probes like a wrench.
For short-hair dogs,
use the short probes.
For long-hair dogs,
use the long probes.
Changing the Probes
The collar comes with short probes pre-installed. These work best for short-haired dogs.
Collar
Battery
Probes
Test Bulb Tool
Installing the Battery
1. Remove the blue faceplate from the collar.
2. Pull the collar loose to expose the battery cover.
3. Remove the cover, insert the battery and replace the cover.
4. Pull the collar tight and replace the faceplate. It should click into place.
Once the battery is installed, you should hear a beep, and the
collar will be set to the fourth sensitivity level.
Faceplate
Battery
Battery Cover
Insert Battery
Collar Features
Microphone
Sensor
Vibration
Probes
Indicator Light
Sensitivity
Adjusters
Sensitivity
Adjusters
