INSTRUCTION MANUAL CODE 80241 REV D
June 2012
(It can be modi
fi
ed without notice)
Page: 19
J
.P. SELECTA s.a.
Ctra. NII Km 585.1 Abrera 08630 (Barcelona) España
Tel (34) 93 770 08 77 Fax (34) 93 770 23 62
e-mail: [email protected] - website: http://www.grupo-selecta.com
6.2 Control panel
1. Pressure gauge
2. Overtemperature indicator
3. Open door indicator
4. Temperature selector 121ºC/134ºC
5. Timer knob
6 Lid release button
7. Operation at 121ºC indicator
8. Operation at 134ºC indicator
9. Sterilization phase indicator
10. End of cycle indicator
6.3 Lateral part
11. Safety valve
12. Purge, vacuum and closed manual valve
13.Purged steam and drainage outlet
17. Network connection cable
18. Fuses
19. Safety thermostat (reset button)
Important: The safety thermostat comes adjusted from the factory. It is
advised not to handle it except to reset it by pressing its button
2
3
10
5
8
6
7
4
9
1
6.4 General view
14. Control panel
15. Open /Close door handle
16. Main power switch
14
15
16
expected life for this equipment is about 20 years, with a work system of 4 opera-
tions / day during 365 days a year. However, the equipment real life is subjected
to the periodical tests every 10 years and the annual checks.
- Corrosion: The use of genuine stainless steel in the autoclave vessel guarantees
the resistance to the corrosion of water, steam and products to be sterilized.
11
12
13
17
18
19
