13
12
14
Unit Operation
Unit Operation
Unit Operation
Applying the Arm Cuff
1. Firmly insert air plug into opening located on behind side of monitor unit.
2. With sticky nylon section facing outward, insert end of cuff underneath metal ring
of cuff
3. Fasten cuff about
above the elbow joint. For best results apply cuff to
bare arm and keep level with heart while testing
.
1-2cm (0.4-0.8'')
.
2. Time Format setting
Press
again to set the time fornat setting mode.
Set the time format by adjusting the MEM button. EU means European Time US
means U.S Time.
"GROUP1" button or "GROUP2" button
"
"
6. Saved Settings
4.Voice Setting
Press "GROUP1" button or "GROUP2" button to enter voice setting mode. Set voice format
ON or OFF by pressing the "MEM" button.
5.Volume Setting
Press "GROUP1" button or "GROUP2" button to enter volume setting mode. Set the voice
volume by adjusting the "MEM" button . There are six volume levels.
While in any setting mode, press " START/STOP " button to turn the unit off. All
information will be saved.
Note: If unit is left on and not in use for 3 minutes, it will automatically save all information
and shut off.
Unit Operation
System Settings
With power off, press "GROUP1" button or
to activate System Settings.
The Memory Group icon flashes.
"GROUP2" button
11
3.Unit Setting
Press
to enter unit setting mode. Set format
by pressing the "MEM" button.
"GROUP1" button or "GROUP2" button
1. Time/Date setting
Press
again to set the Time/Date mode. Set the year
first by adjusting the
“
MEM
”
button.
Press
again to confirm current month. Continue
setting the date, hour and minute in the same way. Every time the
“
SET
”
button is pressed,
it will lock in your selection and continue in succession ( month, day, hour, minute,
12/24 hours)
"GROUP1" button or "GROUP2" button
"GROUP1" button or "GROUP2" button
AM
AM
mmHg
KPa
