Figure 3
B. Pre-Drive Inspection
b. Check for Engine Oil Level. Check for leaks, add oil if required.
c. Check for Fuel Level. Add fuel as necessary and do not overfill. Check for
leaks.
d. Check for Brakes. Depress the rear brake pedal several times, and then check for
proper brake pedal free play. Make sure there is no brake fluid leakage. Adjust if
necessary.
e. Check Tires. Check tires condition and pressure. The pressure on both Front and
Rear tire is 15kpa and 20kpa.
f. Check Drive Chain. Check for drive chain’s condition and tension. Lubricate if
necessary.
g. Check Throttle. Check for smooth operation. Assure throttle “snaps” back to
idle.
h. Check Engine Stop Button. Perform engine stop button test. Repair as
necessary.
i. Check all Nuts, Bolts, and fasteners. Check wheels to see that all axle nuts and lug
nuts are tightened properly. Check and tighten as necessary all other fasteners to
specified condition.
j. Check Roll Cage Bar. Ensure all protective roll cage bar are in place before
operating the Go-Kart.
k. Check Brake Light. Check for proper operation.
L
. Check Wheels. Check for tightness of wheel nuts and axle nuts; check that axle nuts
are secured by cotter pins.
m. Check Steering. Check for free operation for any unusual looseness in any area.
Summary of Contents for Dirt Devil SZ250DS 2006
Page 1: ......
Page 26: ...WIRING DIAGRAM...
Page 43: ...No P N ENGLISH Qty 1 172MM 100000 Carburetor assy 1...
Page 53: ......