41
INNOCIGS EVIC VTWO – OPERATING & CHANGING THE MODES
Changing between the vaping modes
Press the fire button three times in quick succession to enter the menu. The display will indicate you are in the settings menu by
flashing. Turn the control knob to the right to toggle between TEMP (VT), TCR, POWER (VW) and BYPASS modes. Press the fire
button or wait until the display flashes ten times to confirm the current settings and exit the menu.
1. To select the TEMP or TCR mode, turn the control knob to the left while the display is flashing to enter the submenus VT,
PWR, COIL (resistance of the atomizer coil) and AMP (actual current). Turn the control knob to the right to navigate between
modes TEMP NI, TEMP TI, TEMP SS316 and TCR M1, M2 and M3. Press the fire button to confirm your selection. If the AMP line
flashes, turn the control knob to the right to switch between AMP, PUFF and TIME.
2. After selecting the POWER or BYPASS mode, turn the control knob to the left while the display is flashing to enter the
submenus. To switch among AMP, PUFF and TIME turn the control knob to the right, as soon as the AMP line is flashing.
